Description
Built - in Pulse Programs
These programs offer a reduced heat - affected zone, let you weld in all positions. They're great for welding thick to thin metal, have excellent gap - filling ability, and enable faster travel speeds and deposition.
SharpArc®
It controls the arc in Pulsed MIG mode, giving you full control over the arc cone shape, puddle fluidity, and bead profile.
Auto - Line™ Power Management Technology
You can hook up any input voltage (208 - 575 VAC, single - or three - phase) without manual linking. It's very convenient for any job and is an ideal solution for dirty or unreliable input power.
Advanced Features for Professional Welders
Adaptive Hot Start™ makes starting stick electrodes easy without inclusions. There's infinite arc control in Stick and Wire modes for fine - tuning tough - to - weld materials and out - of - position applications. Lift - Arc™ starts the arc while minimizing electrode contamination without high - frequency use.
Standard 14 - pin Receptacle
It's flexible and can be used with spool guns, feeders, and remote controls.
Welder - friendly Control Panel
The process selector switch reduces control setup combinations without sacrificing features. The ultra - tough, polycarbonate - blended cover protects front controls. Large, dual digital meters are easy to view and presettable for easy weld output setting.
Reliability
Wind Tunnel Technology™ protects internal components, improving reliability. The Fan - On - Demand™ cooling system operates only when needed, reducing noise, energy use, and contaminants pulled through the machine.
Added Features
The 70 Series MPa wire feeder provides synergic pulsed MIG. When you increase or decrease the wire feed speed, the pulse parameters change accordingly, matching the power output to the wire speed and eliminating the need for additional adjustments.
Specifications
Click the image below to view the spec sheet.
Using the Miller XMT 350MPa Multiprocess Pulse MIG is straightforward. First, connect it to the power source using the Auto - Line™ technology, which can handle a wide range of voltages. Make sure the input power is within the specified range. When using the Stick or Wire modes, take advantage of the Adaptive Hot Start™ for easy electrode starting and the infinite arc control for fine - tuning. The Lift - Arc™ function helps minimize electrode contamination. For Pulsed MIG mode, rely on the SharpArc® to control the arc shape and puddle fluidity. The 14 - pin receptacle allows you to connect spool guns, feeders, or remote controls as needed. Use the process selector switch on the control panel to choose the appropriate welding process with ease. The dual digital meters can be preset to your desired weld output. When it comes to maintenance, the Wind Tunnel Technology™ protects the internal components, but it's still a good idea to keep the machine clean. The Fan - On - Demand™ cooling system reduces energy use and noise, and it only runs when necessary. Check the wire feeder regularly, especially the 70 Series MPa wire feeder, to ensure smooth operation. And don't forget to refer to the spec sheet for detailed technical information.
