Experience top-notch precision arc performance with a modern, user-friendly interface that gives you advanced capabilities easily. Dynasty TIG power sources reduce errors and ensure high-precision welds every time, making great welders even better. The Blue Lightning feature offers more consistent high-frequency (HF) arc starts and better reliability than traditional arc starters. Pro-Set removes the guesswork when setting weld parameters. Locks and limits control weld parameter ranges to minimize deviation from the welding procedure specification (WPS). The Cooler Power Supply (CPS) is an integrated 120-volt receptacle for the Coolmate™ 1.3, available on select models. Processes include AC/DC TIG (GTAW), Pulsed TIG (GTAW-P), and Stick (SMAW). Applications cover Aerospace, Heavy Fabrication, Precision Fabrication, Aluminum Ship Repair, Pipe and Tube Fabrication, and Anodized Aluminum Fabrication. Features include the Pro-Set™ feature for easy parameter setting, a Sleep timer to save electricity, Auto-Line™ for flexible power connection, Cooler Power Supply (CPS), Lift-Arc™ starting for clean welds, Blue Lightning™ high-frequency arc starter, Meter calibration, Wind Tunnel Technology™ to protect components, Fan-On-Demand™ and Cooler-On-Demand™ to reduce noise and energy use, Thermal Overload Protection, Wireless remote compatibility, IP23 rating for outdoor use, AC TIG Features, AC Pulsed TIG standard 0.1 to 500 PPS, AC Balance (50 - 99%), AC frequency (20 - 400 hz), and Advanced AC Waveforms. Included with the product are Dynasty® 210, 8 ft. (2.4 m.) Primary Cord, Adjustable Shoulder Strap, (2) 50 mm. Dinse-style Connectors, Coolmate 1.3, Small Runner Cart, Coolant (4 gallons), Wireless Foot Control, and W - 250 Torch Kit.
Using the Miller Dynasty 210 is quite straightforward. First, connect it to the appropriate power source using the Auto - Line™ feature, which automatically adjusts to 208 - 575 VAC single - or three - phase power. Then, if you're using the Coolmate™ 1.3, plug it into the Cooler Power Supply (CPS). When setting weld parameters, you can use the Pro - Set™ feature. Just select it and adjust until it appears on the display. This works for Balance, Frequency, Pulse, and DIG parameters. For arc starting, you can choose between Lift - Arc™ for x - ray clean welds without high - frequency or Blue Lightning™ for non - contact arc initiation. The Sleep timer is a great energy - saver. Set it according to your needs, and the machine will power down if it's idle for that specific time. When it comes to maintenance, thanks to the Wind Tunnel Technology™, the internal electrical components are protected from airborne contaminants. But still, keep the machine in a clean environment. The Fan - On - Demand™ and Cooler - On - Demand™ features help reduce the amount of contaminants pulled through the machine. Check the coolant level regularly if you're using the Coolmate 1.3. The thermal overload protection is there to safeguard the internal components. If the duty cycle is exceeded or air flow and cooling are restricted, the unit will automatically shut down. Make sure to use it within the specified IP23 rating. It's for outdoor use but needs shelter during precipitation.
