Description
The DLF-82 wire feeder is a perfect match for Flextec power sources. It's great for Pulsed MIG and CV-MIG welding. This feeder combines the latest welding innovation with user - friendly controls, offering simplicity and high - performance.
Features
- Easy System Setup: Comes with a 5 - pin ArcLink control cable, .035/.045 drive rolls, a wire reel stand for up to 60 - lb spools, and a Magnum 350 HDE weld gun.
- User - Friendly: For synergic setup, just pick your weld process, wire type, wire diameter, and gas type.
- Synergic Weld Modes: One - knob control. Adjust wire feed speed for different material thicknesses, and voltage adjusts automatically (requires synergic compatible Flextec).
- Pulsed MIG Support: Works with pulse - supporting Flextec power source, reducing spatter and improving puddle control (requires pulse compatible Flextec).
- Auto Settings: Run - in speed, pre - flow, post - flow, and burn - back are auto - set based on configuration (requires auto - settings compatible Flextec).
- Memory Function: Stores up to four weld schedules for easy switching between different welds, configurable from 1 - 4 memories.
- Limits/Lockouts: Lowers the risk of accidental out - of - procedure welding.
- MaxTrac Wire Drive: Provides consistent and reliable wire feeding.
- Customizable Settings: Allows greater control over the weld profile at the start and end of the weld.
Included with Product
- 8 - ft Arc Link control cable
- DLF - Feeder Wire Reel Stand - K5284 - 1
- Drive Roll Kit Combination .035 / .045 in Solid Wire - KP1696 - 1
- DLF - 82 Base Model - K5282 - 1
- Magnum PRO Curve HDE 350 Welding Guns - K4532 - 2 - 10 - 45
Specifications
Click the image below to view the full specification sheet.
Using this Lincoln DLF - 82 welding system is easy. First, make sure you have the right Flextec power source that's compatible with the features you want to use. For the synergic setup, select your desired weld process, wire type, wire diameter, and gas type. Then, adjust the wire feed speed according to the material thickness - higher for thick materials and lower for thin ones. The voltage will adjust automatically if your Flextec is synergic - compatible. When using Pulsed MIG, make sure your power source supports it to enjoy less spatter and better puddle control. The auto - settings will take care of run - in speed, pre - flow, post - flow, and burn - back as long as your Flextec has auto - settings compatibility. You can store up to four weld schedules for quick changes. Be aware of the limits/lockouts to avoid accidental out - of - procedure welding. For maintenance, keep the MaxTrac wire drive clean to ensure consistent wire feeding. You can also customize the start and crater settings to get the perfect weld profile at the beginning and end of your welds. Refer to the full specification sheet for more detailed information.
