Description
The Metabo KFM 18 LTX 3 RF is the world's first cordless metal beveling machine. It can create 45° chamfers up to 4 mm and radii of 2 and 3 mm. This tool prepares surfaces free from oxide and burrs, which is perfect for powder or paint coatings to protect against corrosion.
It features a one - touch controller with a patented, tool - free cutting depth setting in 0.1 steps. There are stop points for quick setup and protection against accidental depth adjustment during work. The slim cutter head allows you to work on tubes, drilled holes from Ø 13 mm, and exterior contours. The parallel stop ensures a uniform finish on straight edges.
The battery pack can be swiveled for hard - to - reach areas. It has overload protection to prevent motor overheating, an electronic soft start for smooth operation, and restart protection to avoid accidental startup after power interruption. The detachable dust filter keeps the motor safe from coarse particles. It uses a LiHD battery pack for high performance, long service life, and low heat generation, along with Ultra - M technology for efficient charging and energy use.
Included with Product
- 2 Carbide indexable inserts 45° chamfer
- MetaLoc case
- 2 Carbide indexable inserts radius R2
- 2 Carbide indexable inserts radius R3
- Guide Stop
- Screwdriver Torx 15
- Bow type handle
- Dust Protection Filter
- 2 LiHD Battery Packs (18 V/5.5 Ah)
- Charger ASC 30 - 36 V 'AIR COOLED'
Specifications
Click to view Spec Sheet
Using the Metabo KFM 18 LTX 3 RF is easy. First, make sure the battery is fully charged. Attach the appropriate carbide indexable inserts for the chamfer or radius you need. Use the one - touch controller to set the cutting depth. When working, keep the parallel stop against the straight edge for a consistent finish. You can swivel the battery pack to reach difficult spots. Remember, the tool has overload protection, so if it gets too hot, it will shut off to protect the motor. After use, detach the dust filter and clean it regularly to keep the motor in good condition. Also, store the tool in the MetaLoc case to protect it from damage. Don't forget to charge the LiHD battery packs after each use to ensure long - term performance.
