The Miller Wireless Remote Adapter Kit is a game - changer for your welding experience. It comes with a mounting bracket and a 30 - inch control cable. This kit significantly improves reception when you use a Miller wireless remote hand control or foot control. The bracket can be easily mounted on the side of the welder, raising the wireless receiver. This setup enhances the line - of - sight between the wireless receiver and the remote control, ensuring a more stable connection. If you're using Miller PRO series diesel welders, this kit is a must - have. For all other wireless - compatible Miller welders, it's an excellent optional upgrade. Included in the kit are a mounting bracket and a 30 - inch control cable with 14 - pin male plug and 14 - pin female receptacle.
Using this Miller Wireless Remote Antenna Adapter Kit is easy. First, find a suitable spot on the side of your welder to mount the bracket. Make sure it's a stable place. Then, attach the mounting bracket firmly. Next, connect the 30 - inch control cable with the 14 - pin male plug to the appropriate port on the welder and the 14 - pin female receptacle to the relevant part of the wireless system. When using it, keep the area around the wireless receiver and remote control clear to maintain a good line - of - sight. For maintenance, regularly check the connections of the cable and the bracket to ensure they are tight. If there's any sign of wear on the cable, replace it promptly. Also, keep the kit clean and dry to avoid any damage to the electrical components.
